Maintaining Industrial Hoses – How To Do It Well?

In the industrial environment the application of a hose system is very necessary to facilitate the production process. Assembled hoses containing oil or chemicals that have high pressure can cause problems if the performance is not noticed. The hose is a traffic lane that cannot be jammed when the production process is running; if there are some problems with the hose such as cracks, leaks, wear, or contaminated with chemicals, be prepared to face major problems in your manufacturing industry.

Effective early detection with hose testing services can prevent security problems caused by a decrease in hose quality in your industry. Hose inspection and hose testing are very necessary to maintain the security and smoothness of industrial processes; this service will really keep you away from various risks in all hose assemblies in your industry.

Using hose testing helps maintain hose safety and durability over time. Hose testing involves liquids that are inserted into a tube or hose which will be tested with a pressure test technique with a standard from the test capacity of a tube or hose. If the industry uses a hose system that has been through hose testing, then they will reduce manufacturing costs due to poor production quality.

The method of testing the hose which is often used in the manufacturing industry is the Hydrostatic Pressure Test. This test aims to measure the strength and leakage of cylindrical tubes, pipes, tanks, boilers, hoses and others. As the owner of a manufacturing industry, you have a responsibility for the safety and security of employees who work around hose assembly systems; therefore, hose testing must be carried out regularly. However, before you do that, you need to know that testing has different frequencies based on things such as pressure measurements, product types, and manufacturing standards. Based on the references I read that each country has laws and codes of ethics for this test. For example, visual inspection and testing are carried out every two years for high-pressure hose assemblies. And for low-pressure assemblies, it can be done each five or ten years

What will happen if the hose or tube fails the test? Well, they will break. If this happens, you must replace them with a new one. A hose testing expert will usually recommend replacing them or not. The point is that testing and recommendations aim to avoid danger from hoses when they are used.

Whatever pathway is chosen to protect hose assemblies in your company; it is strongly recommended to consider the safety and protection offered, as well as their impact on the environment. Then, make sure to consider the total cost of building, maintaining and reconstructing any damage to the hose assembly.